Jungbecker Asymmetrical De-Glaring Prism (ADP)

In stock
Panel measures 61.02" x 12.2" x .118"

  • Asymmetrical prisms with one-sided perpendicular flank
  • Parallel / collimated light is deflected at 20°
  • High transparency, asymmetrical microstructured prism sheet 
  • Suitable for wall washer applications
  • Made in Germany
$0.00 / sqft

Microstructured Acrylic for Light-Management


The Asymmetrical De-Glaring Prism (ADP) is a special application of the Linear De-glaring Prism (LDP). These prisms are asymmetrical with a one-sided perpendicular flank. Parallel light is deflected asymmetrically which enables directed illumination of objects and surfaces.


  • Highly transparent asymmetrical microstructured prism sheet
  • Asymmetrical prisms with a one-sided perpendicular flank
  • Parallel/collimated light is deflected at 20°


  • For lighting applications with UGR < 19
  • Ideal for illumination of workstations


The recommended fabrication methods for Jungbecker Optics are:

  • Circular saw cutting (edge polishing required in a 2nd step)
  • Laser cutting

It is important for the laser to have 360° suction, which means the air, smoke, and dust should be extracted from under and over the sheets.


Jungbecker Optics can be thermoformed according to customer specifications, however there are limitations to the curvature that can be achieved. Please consult with Roehm if interested in forming a specific part.

4019 chart

Technical Data

Standard Material Acrylic (clear)
*Size 1550 mm x 310 mm (usable area 1520 mm x 280 mm)
Thickness 3 mm (2.5 up to 6.0 mm upon request)
Prism pitch 1 mm
Refractive index 1.491
Transmittance 92%
Efficiency > 95 % (in typical LED luminaire)
Temperature range -40 °C up to +80 °C
Customization options Development of prismatic microstructures for your specific applications, tooling, and series production

*Contact Roehm for availability of additional sizes